|
|
Tanaka TPH-260PF Long Reach Pole Hedge Trimmer
|
|
List: $820.81
Price: $713.75
You Save: $107.06
Out of stock
Item Number: TPH-260PF
|
| |
| |
| ENGINE |
| Engine Type: |
PureFire® Two-Stroke |
| Displacement CC (CU. IN.): |
25 |
| Output H.P.: |
1.3 |
| Fuel Tank Capacity FL. OZ. (CC): |
23.0 (670) |
| Cylinder: |
Chrome Plated, Stress Relieved |
| Connecting Rod: |
Forged Steel |
| Carburetion: |
Walbro® Diaphragm w/ Primer |
| Starting System: |
Standard Recoil |
| Ignition System: |
Transistorized Electronic |
| Clutch System: |
Heavy-duty Centrifugal |
| |
| DRIVE SYSTEM |
| Drive Shaft: |
7mm Solid Steel |
| Shaft Length IN. (MM): |
59 (1,504) |
| Drive Shaft End: |
Splined |
| Drive Shaft Support: |
5 Shaft Bearings |
| Outer Tube Diameter - (MM): |
24 |
| Anti-Vibration System: |
Rubber Sleeve (Engine) & Padded "D" Handle |
| Front Handle: |
Padded "D" Handle |
| Rear Handle: |
Heavy-duty Plastic with Safety Throttle |
| Throttle Lock: |
Yes |
| Gear Box: |
Heavy-duty |
| Gear Ratio: |
4.78 : 1 |
| |
| BLADE RELATED |
| Blade Length IN. (mm): |
22 (559) |
| Blade Cutting Angle: |
135 (Upper side 45 Down side 90) |
| Blade Type: |
Double-sided, Dual Reciprocating |
| Blade Thickness IN. (mm): |
.09 (2.3) |
| Blade Material: |
Hardened Steel |
| Blade Strokes Per Second: |
24 |
| |
| MISC. |
| Dry Weight / LBS. (KG): |
13.8 (6.2) |
| Shipping Weight / LBS. (KG): |
22 (9.9) (One engine box / one shaft box) |
| EPA Phase 2 Compliant: |
Yes |
| C.A.R.B. Tier II Compliant: |
Yes |
| Gas / Oil Ratio: |
50:1 |
| Warranty: |
Two-year commercial use warranty / Three-year consumer use warranty / One-year rental use warranty |
| Packaging: |
Engine and Shaft Boxed Separately |
| |
CARTON CONTENTS
Spanner, Unit Owner's Manual, Emission Statement, Warranty Statement, Product Registration Card, Wire Clamp, Flat headed Pipe, Straight Pipe
|
|
| |
| |
 PUREFIRE® TWO-STROKE ENGINE
Proven engine technology meets emissions levels without sacrificing power, adding weight, or creating maintenance headaches
22" ARTICULATING BLADES
Allow you to select any cutting angle from 0 to 130 degrees.
BEARING SUPPORTED, SOLID STEEL DRIVE SHAFT
Provides smooth and efficient power transfer from the engine to the cutting blades.
|
|
| |
| |
ADVANTAGES OVER THE ECHO HCA-260:
Solid Steel Drive Shaft
Longer Cutting Blades
Larger Fuel Tank Capacity:
ADVANTAGES OVER THE REDMAX LRTZ2500:
Much Longer Blades - 22" vs. 16"
Greater Articulating Angle - 130 degrees vs 90 degrees
ADVANTAGES OVER THE SHINDAIWA AH2510:
No Valve Adjustments Required
Less Moving Engine Parts
Not limited to only 10 cutting angles
More Horsepower
Less Weight |
|
Additional InformationClick here for more information! |
Product Reviews
|
Soy Organic TM
|
|